Azeco Cosmeceuticals

x Safety Data Sheet acc. to Regulation (EC) No. 1907/2006 (REACH) AZELAIC ACID

Version number: GHS 2.0 Replaces version of: 2020-01-02 (1)

Revision: 2022-05-05

- type of material Nitrile rubber - material thickness Use gloves with a minimum material thickness: ≥ 0,38 mm. - other protection measures Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended. Wash hands thoroughly after handling. Provide eyewash stations and safety showers at the workplace. Respiratory protection Control of dust. Avoid inhalation of the product. In case of inadequate ventilation wear respiratory protection. P2 (filters at least 94 % of airborne particles, colour code: White). Environmental exposure controls Take appropriate precautions to avoid uncontrolled release into the environment. Keep away from drains, surface and ground water. SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties Physical state solid (powder, flakes) Colour white Odour characteristic Melting point/freezing point 106.5 °C Boiling point or initial boiling point and boiling range 357.1 °C Evaporation rate not determined Flammability this material is combustible, but will not ignite readily Lower and upper explosion limit LEL: 30 g/m³ UEL: Flash point 180 °C Auto-ignition temperature not determined Decomposition temperature no data available pH (value) not applicable Kinematic viscosity not relevant

Solubility(ies) Water solubility

1 g / l at 1 °C

1.57 (25 °C)

Partition coefficient n-octanol/water (log value)

United Kingdom: en

Page: 6 / 12